Fluid Mechanics Lab Equipment

Approx. Rs 85,000 / PieceGet Latest Price

Range Of Experiments

• To demonstrate pipe surge and water hammer phenomena.
• To study the oscillatory characteristics of the surge.
• To determine the velocity of sound in the pipe.
• Determination of sudden rise in pressure due to sudden closure of value.
• Visualization of pressure wave profile at different heads.
• Determination of frictional head loss between reservoir & surge tower.

Details:

• Pipe surge test pipe stainless steel, 22mm I/D x 3m long.
• Surge shaft clear acrylic, 40mm I/D x 800mm H.
• Service pump centrifugal type, delivering 0.5 lit/sec at 3m water head.
• Flow rate measurement volumetric tank, stepped 0-40 liter high flows, 0-6 liter low flows.
• Head tank capacity 90-100 liters made from PVC.
• Pressure transducers 3 off the range,1 to 1 bar, 0.25" BSP connections.
• 2 Nos. Quick acting Solenoid Valve electrically operated.

Electronic Control Panel

• Current to voltage converter as per suitable for sensors.
• Input and Output terminals for DSO.
• Solenoid ON/OFF switches.
• Power supply terminal for sensors.
• Inbuilt power supply for sensors and conversion.

Oscilloscope - dual trace storage oscilloscope [DSO]

• With online wave streaming recording and storage.
• Facility to transfer the data to a PC.
• Pressure comparison for water Hammer.
• the velocity of sound through a pressure wave

• Water Supply, laboratory mains supply, Oscilloscope.
• SPACE REQUIRED Height 1.80 m x Length 6.00 m x Width 0.75 m

Features

• Sturdy construction
• Easy to operate
• Impeccable performance
• Negligible maintenance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 20
• Delivery Time: 1-2 Weeks

Approx. Rs 70,000 / PieceGet Latest Price

Electronic Control Panel.

Following characteristics can be studied at different heads.

• Discharge V/S Head.
• Discharge V/S Input to pump.
• Discharge V/S Pump efficiency.
• Calculate the output of the pump, given the discharge and the total head.
• Calculate the input.
• Calculate the efficiency.

Details:

Centrifugal Pump

• Model- Monoset.
• Supply- 1, 230V, 16 Amp.
• Make Crompton Greaves.
• Power Rating-1 HP, 2900 rpm.

Pressure Gauge

• Capacity-4 Bar.
• Size- 4", back connection.

Vacuum Gauge

• Capacity-760mm of Hg.
• Size- 4" Back connections.

Digital AC Wattmeter

• Rating 1, 230V, 10 Amp.
• Sump tank
• Capacity- 225 liters.
• Make- Sintex.
• Measuring Tank Capacity- 140 Ltrs,
• Make- Aristo-650 x 450 x 600.
• Flow control valve 1.25 inch.

• 5A, 230 VAC single phase supply with earthing connection. electrical supply
• Suitable water supply arrangement
• Suitable drainage arrangement.
• Space required 1.5 mtr X 0.7 mtr approx.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 20
• Delivery Time: 1-2 Weeks

Product Price :Get Latest Price

As per the variegated requirements of our clients, we are offering a broad collection of Pipe Friction Apparatus. This apparatus is designed and manufactured using excellent quality raw material and latest technology by our skilled professionals. In order to ensure quality, offered apparatus is stringently tested on various parameters by our experts. Apart from this, remarkable quality and sturdy structure increase the demand of our offered range in the market.

Features:

• Sturdiness

• Easy to operate

• Superior performance

Range of Experiments:

• Determination of coefficient of friction of GI pipe:1",1/2",3/4".(dia)
• To plot relation between pressure loss & flow rates for a particular pipe diameter.

Specifications:

• Sump tank: Made up of PVC resist corrosion.
• Capacity: 100 Litres (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 25 Litres, Material: Rota mould, Make: Aristo.

Pipes:

• All pipes are of 1000mm length
• Piping: PVC piping with valves & QRC couplings.
• Digital stop watch.
• Differential manometer.
• Frame: Made of M.S square tubes & sheets, welded & powder coated.
• Mercury in Manometer ( optional ).
• Necessary electrical wiring with on / off switch & indicators.

Product Price :Get Latest Price

• Measurement of pressure losses across different kinds of bends, fitting & gate valves at the varies water flow rate.
• Calculation of pressure loss coefficient at varies flow rates.
• Determination of pressure drop vs flow characteristics curves for different fittings.

• Sump tank: Made up of PVC resist corrosion, Capacity: 100 Litres (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make Crompton Greaves or Equivalent.
• Measuring Tank: 25 Litres, Material: Rota mold, Make: Aristo.
• Differential manometer.

• Supporting stand structure,
• The circuit of Two pipes of 25mm & 12.5 mm,
• Sudden enlargement from 12.5 mm to 25 mm dia.,
• Sudden contraction from 25 mm to 12.5 mm dia.,
• Bend & elbow of 12.5mm dia each.
• Gate value & Ball value.
• Piping: PVC piping with valves.
• Digital Stopwatch.
• Frame: Made of M.S. square tubes & sheets, welded & powder coated.
• Mercury in Manometer ( optional ).
• Necessary electrical wiring with on / off switch & indicators.

• 5A, 230 VAC single phase supply with earthing connection.
• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1.5 meter X 0.7 meter approx.

Product Price :Get Latest Price

Following characteristics can be studied at different Speeds:

• Discharge V/S Head.
• Discharge V/S Input to pump.
• Discharge V/S Pump efficiency.
• Calculate the output of the pump, given the discharge and the total head.
• Calculate the input.
• Calculate the efficiency.

Details:

Vacuum Gauge:

• Capacity:-760mm of Hg
• Size:- 4" Back connections

Digital Wattmeter:

• Rating: 1 Ø , 230V ,5Amp
• Sump tank: Capacity:- 175 ltrs
• Measuring Tank:Capacity:- 30 Liters
• Single Phase D.C Motor with Drive:Capacity: 1 HP, RPM: 2880
• Proximity Inductive Sensor:· RPM Indicator,· Flow control value: Material: Brass.

Services Required:

• 5A, 230 V AC single phase supply with earthing connection. electrical supply
• Suitable water supply arrangement
• Suitable drainage arrangement.
• Space required: 1.5 mtr X 0.7 mtr approx.

Approx. Rs 48,000 / PieceGet Latest Price

• A coefficient of discharge, Cd.
• A coefficient of velocity, Cv.
• A coefficient of contraction, Cc of given orifice and mouthpiece.

• Sump tank: Made up of PVC resist corrosion.
• Capacity: 100 Ltr. (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 25 Litres, Material: Rota mold, Make: Aristo.
• Constant Head Tank: 20 Litres (Approx), Material: PVC
• Set of Orifice: I.D. 8 mm.
• Convergent Divergent Mouthpieces: L/D 4 / 1 , material : Aluminium.
• X-Y- Arrangement : Range : 0 - 500 mm.
• Supporting stand structure for the equipment.
• Piping: PVC piping with valves.
• Digital Stopwatch.
• Frame: Made of M.S square tubes & sheets, welded & powder coated.
• Necessary electrical wiring with on / off switch & indicators.

• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1.5 mtr X 0.7 mtr approx.

Product Price :Get Latest Price

Features:

• Long operational life

• Smooth functioning

• Rugged design

Product Price :Get Latest Price

Features:

• Less power consumption

• Highly efficient

• Compact design

Turbine Unit :

• Casing: Sturdy C. I. Scroll casing with draft tube.
• Runner: Mixed flow type specific G.M. runner is fitted inside the casing.
• Wicket Gate Assembly Is of Gunmetal designed for efficient by a hand wheel through a link mechanism. Guide vanes are working inside the turbine with an external dummy.

Centrifugal Pump Unit :

• Head: 14 mtr.
• Discharge: 16 LPS.
• Power: 5 H.P.
• Speed: 2880 RPM

Loading Unit :

• Turbine is directly coupled to Rope Brake Pulley with drum cooling, Spring balance & dead weights.

Flow Measurement Unit :

• A 2” Venturi meter with differential manometer without mercury.

Sump Unit :

• M.S. C.R.C. sheet metal sump of 700 lit. capacity with inside fiber lamination and drain plug.
• Suction & Delivery Piping and fittings are provided with Pressure gauge, foot valve & flow control valve.

Control Panel Unit :

• Digital Speed Indicator with speed sensor.
• Starter Switch with overload relay. The whole unit is fitted on strong and sturdy supporting stand with appreciating color combination.

Features:

• Sturdy construction
• Easy to operate
• Impeccable performance
• Negligible maintenance

Product Price :Get Latest Price

Range Of Experiments:

• Measurement of jet forces on varies target deflectors.
• Determination of theoretical & practical forces on different types of target deflectors.
• Determination of jet forces at different jet velocities.
• Comparison of varies forces at different conditions.

Details:

• Sump tank: Made up of PVC resist corrosion, Capacity: 100 Litres (Approx.),Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 25 Litres, Material: Rota mold, Make: Aristo.
• Transparent Cylinder with the nozzle of 8 mm diameter (approx).
• Three test plates (vanes).
• Flow control valve: Material: Brass.
• Flat, conical, Hemispherical, which can be fitted on the weight beam.
• Piping: PVC piping with valves.

• 5A, 230 VAC single phase supply with earthing connection.
• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1.5 meter X 0.7 meter approx.

Product Price :Get Latest Price

Range Of Experiments:

• Calibration of orifice meter.
• Determination of coefficient of discharge. ( Cd )
• Study of flow measurement through orifice meter.
• Determination of actual & theoretical flow rate through orifice meter.

Details:

• Sump tank: Made up of PVC resist corrosion.
• Capacity: 100 Litres (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 25 Litres, Material: Rota mold, Make: Aristo.
• Differential manometer.
• Orifice meter: Made in acrylic, with pressure test Points.
• Piping: PVC piping with valves.
• Digital Stopwatch.
• Frame: Made of M.S square tubes & sheets, welded & powder coated.
• Mercury in Manometer. ( optional )
• Necessary electrical wiring with on / off switch & indicators.

• 5A, 230 VAC single phase supply with earthing connection.
• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1 meter X 0.7 meter approx.

Product Price :Get Latest Price

Range Of Experiments:

• To draw flow net using electrical analogy for sudden contraction & sudden enlargement.

Specification:

• Transparent Tray: 400mm x 400mm x100mm deep.
• Probe traversing: moving in two planes.
• Copper Strips: 100mm x 300mm/100mm x 150mm - 1 mm.
• This apparatus is used along with Analogue Field Plotter to plot flow lines in the tray typical models can be arranged.
• Voltmeter: Range: 5 amp.
• Power supply.
• Necessary electrical wiring with on / off switch & indicators.

Services Required:

• 5A, 230 V AC single phase supply with earthing connection.
• Space: 0.5 mtr X 0.5 mtr approx.

Product Price :Get Latest Price

Features:

• High efficiency

• Trouble-free operation

• Low maintenance cost

• Kaplan Turbine designed for laboratory experimental purpose & to conduct test under constant head of the following specifications.
• Net Head : 5 m.
• Discharge : 1500 LPM.
• Normal Speed: 1000 RPM.
• Power : 1 HP
• Brake Drum Dia.: 300 mm.

• Spiral Casing: Of close grained cast iron, with 150 mm flanged inlet.
• Guide Vane Assembly: Stainless steel guide Vanes coast integral with their spindles with external link mechanism, which can be operated by means of a hand wheel.
• Runner: Of gun metal with polished adjustable foil blades for efficient operations. The blades can be adjustable by means of a suitable area link mechanism housed inside the runner hub, operating through the hollow steel shaft.
• Brake Arrangement: Consists of a cast iron brake drum machined & polished, cooling water supply pipe from the turbine inlet, internal scoop, discharge pipe, spring balance rope brake & loading dead weights.
• Pump with volute casing suitable for the supply of water for the Turbine size of 6” to discharge 1500 LPM at a total head of 8 m. coupled to 7.5 HP induction motor 3 phase 400/440 V. AC. supply
• Flow measuring Unit: A C.I orifice meter of 150 mm dia. (6”) size with double column differential manometer (Without Mercury) on a panel board to measure the difference of pressure.
• Reservoir of size 1.75 m length x 0.9 m width x 0.65 m. height with drain valve of ½ ” size & a bend.
• Starter, Switch, Digital speed indicator, Pipe line with control valve
• Strong iron stand to support the unit.

Product Price :Get Latest Price

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment of Bernoulli''s Theorem Apparatus. It is mainly used for measurement of static pressure variation along venturi at different flow rate. The offered apparatus is manufactured using high grade raw material and contemporary technology. We assure our clients that offered range is quality tested on predefined parameters. Apart from this our prestigious clients can avail the entire range, as per their needs, at highly competitive price.

Features:

• Low maintenance

• Sturdy construction

• Corrosion-resistance

• Familiarization of static & total pressure measurement.
• Demonstration of continuity equation.
• Demonstration bernoulli’s equation.
• Measurement & display of static pressure variation along venturi at different flow rate.

Specification:

• Storage tank: Made up of PVC resist corrosion.
• Capacity: 100 Ltr. (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Constant Head Tanks: 2 numbers of suitable size mounted on stand, Material: Acrylic.
• Differential venturi of 300 mm length made out of Acrylic Square Bar.
• Measuring Tank: 25 Litres, Material: Rota mould, Make: Aristo.
• Multitube Manometer , Material : Aluminium
• Supporting stand structure for the equipment.
• Piping: PVC piping with valves.
• Digital stop watch.
• Frame: Made of M.S. square tubes & sheets, welded & powder coated.
• Necessary electrical wiring with on / off switch & indicators.

Service Required:

• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1.5 mtr X 0.7 mtr approx.

Weight: 50Kg Approx.

Product Price :Get Latest Price

Range Of Experiments

• Rota meter calibration.
• Flow measurement by rotameter.
• Comparison of rotameter flow rate & actual flow rate.

Specification:

• Sump tank: Made up of PVC resist corrosion.
• Capacity: 100 Litres (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 29 Litres, Material: Rota mould, Make: Aristo.
• Rotameter : Material : Acrylic : Range : 0 - 2500 LPH.
• Piping: PVC piping with valves.
• Digital stop watch.
• Frame: Made of M.S. square tubes & sheets, welded & powder coated.
• Mercury in Manometer. ( optional )
• Necessary electrical wiring with on / off switch & indicators.

Services Required:

• 5A, 230 V AC single phase supply with earthing connection.
• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 0.8 meter X 0.7 meter approx.

Product Price :Get Latest Price

Following characteristics can be studied at different Speeds:

• Discharge V/S Head.
• Discharge V/S Input to pump.
• Discharge V/S Pump efficiency.
• Calculate the output of the pump, given the discharge and the total head.
• Calculate the input.
• Calculate the efficiency.

Pressure Gauge:

• Capacity:-1 Bar
• Size:- 4", back connection

Vacuum Gauge:

• Capacity:-760mm of Hg
• Size:- 4" Back connections

Wattmeter:

• Digital AC Wattmeter
• Rating: 1 Ø , 230V, 5Amp
• Sump tank:
• Capacity:- 200 ltrs
• Make:- Sintex
• Measuring Tank:
• Capacity:- 75 Liters
• Single Phase D.C Motor with Drive
• Capacity: 1 HP, RPM: 2880
• Make: Speed rider
• Proximity Inductive Sensor
• RPM Indicator

• 5A, 230 V AC single phase supply with earthing connection. electrical supply
• Suitable water supply arrangement
• Suitable drainage arrangement.
• Space required: 1.5 mtr X 0.7 mtr approx.

Approx. Rs 1 / PieceGet Latest Price

Range Of Experiments

• Visualization of flow around submerged bodies of different shapes in laminar flow.

Specification:

• Flow channel: Made in Glass.
• Dye Injection Needles with Dye bottle: Set of needles for dye Injection.
• Sample Objects: Objects of different shape made in PVC. (Rectangular, Triangular, Circular, Aerofoil. etc...)
• Frame: Made of M.S square tubes & sheets, welded & powder coated.

Service Required:

• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 0.5 meter X 0.5 meter approx.

Product Price :Get Latest Price

Range Of Experiments:

• Determination of Metacentric height of ship.

Specifications:

• Rota mould tank of 60 litres approx. with a drain plug. A hollow ship model with balancing weights.
• Circular weights 4 pin numbers to be used as cargo or warship loads.
• Tilting weights 4 in numbers for balancing.
• A pendulum & graduated arc for measuring tilt angle.
• Piezometer.
• Protector.
• Ship Model.
• Plumb Bob.

Services Required:

• Suitable table to mount the equipment, else it can also be kept at the ground level.
• Floor Space: 0.6 mtr X 0.4 mtr. Approximately.

Additional Information:

• Minimum Order Quantity: 01 Piece

Product Price :Get Latest Price

Features:

• Rust proof

• Enhanced durability

• Compact design

• To determine the Reynolds number & hence the type of flow either laminar or turbulent.
• To determine upper & lower critical Reynolds numbers and velocity.
• To study dye flow visualizations of laminar, transitional, turbulent flow.
• Study of change of flow pattern from laminar to turbulent as a function of reynolds apparatus.
• Calculation of critical velocity & critical reynolds numbers.
• Study of pipe flow & related reynolds number co-relation.
• Co-relation of reynolds number, nature of flow & comparison with data available in literature.

• Storage tank with flow steadying arrangements.
• Tank 50 Litres approximately.
• Storage tank is made up of PVC sheet.
• Measuring Flask.
• Dye bottle & Needles.
• Control valve : Material : Brass, Gate valve.
• Acrylic tube of Size : 25mm I.D, Length:900mm .
• Suitable stand to mount the acrylic tube.
• Piping: Acrylic piping with valves.
• Digital stop watch.
• Frame: Made of M.S square tubes & sheets, welded & powder coated.

• Suitable water supply arrangement.
• Floor Space: 1.5 m X 0.5 m approximately.

Features:

• Sturdy construction
• Easy to operate
• Impeccable performance
• Negligible maintenance

Product Price :Get Latest Price

With sincere intentions to preserve and uplift our reputation in the market, we bring forth a distinguished assortment of Pressure And Flow Measurement Apparatus. Our offered apparatus is manufactured using utmost-grade raw material and cutting-edge technology in compliance with defined quality standards. The offered apparatus is used To measure pressure through different types of manometers. Keeping in mind the diverse requirements of our clients, we provide the entire range in various sizes and designs and at affordable prices.

Features:

• Rugged design

• Reliable operation

• Unmatched performance

Range Of Experiments

Hydraulic setup:

• To measure pressure through different types of manometers.
• Comparison of pressure from the differential pressure measuring devices.
• Flow measurement through Rota meter & Water meter.
• Comparison of discharge from different flow measurement devices.

Pneumatic (Air) setup:

• To measure pressure through different types of manometers.
• Comparison of pressure from different manometer.

Specifications:

• Storage tank: Made up of PVC resist corrosion.
• Capacity: 100 Ltr. (Approx.), Make: Sintex.
• Measuring Tank: 25 Litres, Material: Rota mold, Make: Aristo.
• U- tube manometer: made in acrylic, to measure the pressure along the orifice meter.
• Single limb manometer: made in acrylic, to measure the pressure along the orifice meter.
• Inclined tube manometer: made in acrylic, to measure the pressure along the orifice meter.
• Inverted tube manometer: made in acrylic, to measure the pressure along the orifice meter.
• Simple manometer: made in acrylic, to measure the pressure along the orifice meter.
• Air blower: Model no.25
• Pressure gauge: Make-Wika
• Orifice meter: Material: PVC
• Control value : Material: UPVC
• Rotameter: Material: Acrylic: range: 0-2500 LPH
• Air bulb valve: For air removing
• Water meter: Type: Magnetic
• Necessary electrical wiring with on / off switch & indicators.

Service Required:

• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1 meter X 0.7 meter approx.
• 5A, 230 VAC single phase supply with earthing connection.k.

Weight 50Kg Approx.

Product Price :Get Latest Price

• Calibration of Rotameter, Venturimeter & Orificemeter.
• Determination of coefficient of discharge through orificemeter & venturimeter.
• Comparison of discharge through rotameter, venturimeter & orificemeter.

Specification:

• Sump tank: Made up of PVC resist corrosion.
• Capacity: 100 Litres (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 29 Litres, Material: Rota mould, Make: Aristo.
• Differential manometer.
• Orifice meter : Made in acrylic, with pressure test Points.
• Venturimeter: Made in Acrylic, with pressure test points.
• Rota meter: Made in Acrylic, Range : 0 - 2500 LPH.
• Piping : PVC piping with valves.
• Digital stop watch.
• Frame: Made of M.S. square tubes & sheets, welded & powder coated.
• Mercury in Manometer. ( optional )
• Necessary electrical wiring with on / off switch & indicators.

Services Required:

• 5A, 230 V AC single phase supply with earthing connection.
• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1.2 meter X 0.7 meter approx.

Product Price :Get Latest Price

• V. Notch.
• Rectangular Notch.
• Trapezoidal Notch (optional).

• Sump tank: Made up of PVC resist corrosion.
• Capacity: 100 Litres (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make Crompton Greaves or Equivalent.
• Measuring Tank: 29 Litres, Material: Rota mold, Make: Aristo.
• Open Channel, Material: PVC, Make: Xtreme.
• Depth gauge :0 to 150 mm.
• Set of three brass notches
• V. notch.
• Rectangular notch.
• Trapezoidal notch ( optional ).
• Arrangement for fixing interchangeable notches.
• Necessary electrical wiring with on / off switch & indicators.

• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1 meter X 0.7 meter approx.
• 5A, 230 VAC single phase supply with earthing connection.

Approx. Rs 45,000 / PieceGet Latest Price

• Calibration of Venturi meter.
• Determination of coefficient of discharge. (Cd )
• Study of flow measurement through venturi meter.
• Determination of actual & theoretical flowrate through venturi meter.

Details:

• Sump tank: Made up of PVC resist corrosion,
• Capacity: 100 Litres (Approx.), Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 29 Litres, Material: Rota mold, Make: Aristo.
• Differential manometer.
• Venturimeter made in acrylic with pressure point.
• Piping: PVC piping with valves.
• Digital Stopwatch.
• Frame: Made of M.S. square tubes & sheets, welded & powder coated.
• Mercury in Manometer. ( optional )
• Necessary electrical wiring with on / off switch & indicators.

Service Required:

• 5A, 230 VAC single phase supply with earthing connection.
• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 1 meter X 0.7 meter approx.

Approx. Rs 39,000 / PieceGet Latest Price

• Determination of velocity of fluid in pipes.
• To draw velocity profile of fluid in pipes.
• Comparison of velocity of fluid at different positions.

• Sump tank: Made up of PVC resist corrosion, Make: Sintex.
• Mono-block pump: 1-phase 1/2 HP, Make: Crompton Greaves or Equivalent.
• Measuring Tank: 29 Litres, Material: Rota mould, Make: Aristo.
• Differential manometer.
• PITOT TUBE
• Type: Traversing. Ø Size: 2 to 3 mm
• Purpose: To measure head preasure head.
• Acrylic pipe , Material :Transparent acrylic, Size : 1½ inch.
• Piping: PVC piping with valves, Digital stop watch.
• Frame: Made of M.S square tubes & sheets, welded & powder coated.

• 5A, 230 V AC single phase supply with earthing connection.
• Suitable water supply arrangement.
• Suitable drainage arrangement.
• Space required: 0.8 meter X 0.7 meter approx.