Xtreme Engineering Equipment Private Limited

Additional Information:

• Production Capacity: 100
• Delivery Time: 2-3 Weeks
• Packaging Details: Wooden

Features:

• Rugged construction

• Rust resistance

• Superior performance

• Determination of Stefan-Boltzmann constant.
• Study of effect of hemisphere temperature on the constant

• Hemisphere : 200mm Dia(Approx)
• Jacket:250mm Dia
• Test Disc: 20mm Dia x 1.5mm thickness
• Pressure Cooker with 1.5 kw Immersion heater

• Supply for heater.
• Digital temperature indicator 0-200 DegreeC with 0.1 DegreeC least count using chromel alumel thermocouples. Provided with cold junction compensation.
• Built in timer with indicator for temperature readings at 5 seconds interval

• 230 v. AC. Stabilized and earthing supply.
• Space required: 1mtr x 0.5 mtr, table mounted

• Since research and development is an on going activity,the specifications mentioned herein are subject to change without notice.
• Photograph/ Illustration are only indicative in nature & will change with the exact model/ specifications of the client.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 20
• Delivery Time: 1-2 Weeks

• To Study the Heat transfer phenomenon through Heat Pipe

• O.D. of Heat Pipe: 30 mm nominal
• Stainless Steel Pipe: 30 mm nominal
• Copper Pipe: 30 mm nominal
• Length of the Pipe: 380 mm each (approx)
• Condenser tank size = 140 x 105 x 100 mm. Approx. capacity about 1 liter of water
• Working fluid in heat pipe is distilled water.
• Dimmerstat: 0-2A, 0-230 V.
• Digital Voltmeter.
• Digital Ammeter.
• Temperature indicator 0-200° C multi channels with cold junction compensation.
• Heater Band Type: 400 watts 3 Nos.
• Interface cards for variables transferred to PC: Variables as follows:
• Temperature
• Power to each heater
• Interface cards: ADVANTECH make
• Software: windows based with visual interface.

• 230 AC. 50 Hz. Single Phase Supply.
• Small capacity Vacuum pump to evacuate the heat pipe while recharging and cleaning facility for heat pipe components. (Not supplied with equipment)

• Since research and development is an on going activity,the specifications mentioned herein are subject to change without notice.
• Photograph/ Illustration are only indicative in nature & will change with the exact model/ specifications of the client.

Features:

• Compact design

• Longer working life

• Sturdy construction

• Measurement of emissivity of the nonblack surface over a range of temperatures.

• Test plate and reference plate size 140mm Dia
• Enclosure size is 55 cm x 30 cm x 30 cm with one side of Perspex sheet
• Heater: 200 V 400 watts, Nichrome wire type, sandwiched between mica sheets.

• Digital / analogue voltmeter.
• Digital / analogue ammeter
• DPDT selector switch for voltmeter and ammeter

• 230 V, 5 amp electric supply with earthing connection
• Floor space: 1 m x 1 m approximately

• Since research and development is an ongoing activity, the specifications mentioned herein are subject to change without notice.
• Photograph/ Illustration are only indicative in nature & will change with the exact model/ specifications of the client.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 20
• Delivery Time: 1-2 Weeks

Features:

• Strongly built

• Rust resistance

• Long operational life

• To calculate heat transfer rate.
• To calculate heat transfer coefficient.

• Test Pipe: 30mm I.D. & 500mm length
• Band heater for pipe
• Multichannel Digital Temperature Indicator: 0-300 ºC
• Dimmer stat:2 amp, 240 volts for heater input control
• Voltmeter: 0- 200 volts
• Ammeter: 0-2 amp
• Blower to force the air through pipe
• Oricemeter with water manometer

• Since research and development is an on going activity,the specifications mentioned herein are subject to change without notice.
• Photograph/ Illustration are only indicative in nature & will change with the exact model/ specifications of the client.

Features:

• Sturdy structure

• Durability

• Low maintenance

• Determination of temperature distribution along the length of given bar
• Determination of thermal conductivity of given bar at different temperatures
• Determination of thermal conductivity of any metal bar other than the supplied one by proper fitting of bar in the unit

• Metal bar of copper: 25 x 440 mm length (approx.) Insulation: Thermal Insulation for bar.
• Cooling water chamber: 75 mm dia, 125 mm length.
• Control Panel: Comprising of Panelized electrical instruments. Digital Temperature Indicator/ voltmeter / ammeter / dimmer
• Stop clock, and measuring flask
• Heater: 400 watts (Band Type)
• Digital Voltmeter
• Digital Ammeter
• Dimmerstat: 0- 230 volts, 2 A
• Digital Temperature indicator: 0-3000 with 10 L.C. using cr-Al thermocouples, cold junction compensation.
• Eight thermocouples on bar at equidistant points.

• Since research and development is an on going activity,the specifications mentioned herein are subject to change without notice.
• Photograph/ Illustration are only indicative in nature & will change with the exact model/ specifications of the client.

Features:

• Sturdy construction

• Highly usable

• Low maintenance

• To determine average heat transfer coefficient.
• To calculate and plot variation of local heat transfer coefficient along the length of the tube.

• Enclosure size: 200 mm x 200 mm x 900 mm
• Tube size (test cylinder) 25 mm dia x 400mm length Fin size as per your requirement.
• Nichrome heater (cartridge type): 400 watt

• Digital Voltmeter
• Digital Ammeter
• Dimmerstat: 0-2 A / 230 V
• Digital temperature indicator 0 300°C range, with 1°C least count, Chromel- Alumel thermocouples provided with cold junction compensation

• 230 v A.C. SIngle phase stabilized electrical supply with earthing connection
• 2 m x 1.5 m approx

• Since research and development is an on going activity,the specifications mentioned herein are subject to change without notice.
• Photograph/ Illustration are only indicative in nature & will change with the exact model/ specifications of the client.

Features:

• Precisely design

• High operational fluency

• Low maintenance cost

• To determine the individual and total thermal resistances of composite wall
• To check the theoretical values of thermal conductivity with experimental values

• Mild steel: 200 mm dia x 25mm thick
• Bakelite: 200mm dia x 25mm thick
• Brass : 200mm dia x 25mm thick
• Nichrome Heater of suitable capacity

• Voltmeter: Digital, 0-100/200 v
• Ammeter: Digital, 0-2 amp
• Dimmer stat: 0-230 v, 2 amp
• Temperature Indicator: Multichannel, 0-200 ºC with 0.1ºC least count

Service Required:

• AC single phase, 230v electrical supply

• Since research and development is an on going activity,the specifications mentioned herein are subject to change without notice.
• Photograph/ Illustration are only indicative in nature & will change with the exact model/ specifications of the client.