Send Email
Send SMS

Metallurgy Lab Equipment

XEEPL is one of the Leading Manufacturer, Supplier & Exporter of the Metallurgy Lab Equipment. We Manufacture Jominy End Quench Hardenability Set Up, Furnace, Metallurgical Polishing Machine Single Disc Machine, DOUBLE DISC POLISHING MACHINE, Belt Grinding Machine (DRY BELT SURFACER), Abrasive Cutoff Machine (Chop Type) with diamond cutter, SPECIMEN LEVELLER, SPECIMEN MOUNTING PRESS, Metallurgical Microscope, Standard Samples Of Metallurgical Microstructure, Consumable for Metallurgical Lab etc..
Also We do manufacture the Test Rigs as per customers requirement.

At XEEPL, we understand the dynamics of each customer requirement and the variety of demands of Their Experimental & Research system. We help you with innovative design that makes the system more Reliable, Robust, cost-effective and economical in long run, saving substantially on your power and maintenance cost.

At XEEPL, All the equipments & systems are thoroughly tested before delivery to ensure that they function without problems. Service plays a crucial role in day-to-day dealings with our customers. Therefore, you can take it for granted that we always provide you with exact Instant support.

Our commitment to quality, innovation and after-sale support has helped us to maintain a strong market position and develop a reputation for industry leadership.

Polishing Belt (Belt Sander)


Polishing Belt (Belt Sander)
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 27,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity01 Piece
Linisher belt-sander48 inch x 6 inch wide emery belt.
Power1 H.P.
Working area500mm x 700mm approximately.
Voltagesingle phase 230 volts 50 cycles.
Disc Diameter8 mm
Frequency50 Hz
No Load Speed1500 RPM
Belt Size1240 x 150 mm
Power Consumption750 W

Belt Grinder / Bench Sander:


· Adjustable sanding belt for flexible use

· 200 mm disc for sanding smaller surfaces

· Dust proof switch for extra long lifespan

· Angle guide and adjustable working table for precise working

· 4 vibration padded feet for high stability

Technical Specifications:

v DC Motor with variable speed drive

v Power Input: 750W,

v No Load Speed: 0-1500 rpm Disc, 275 rpm Sanding Belt

v Frequency: 50Hz

v Voltage: 230 V

v Diameter sanding disc: 200 mm

v Belt Size 1240 x 150 mm

Yes! I am Interested

Specimen Mounting Press Mechanical Type


Specimen Mounting Press Mechanical Type
  • Specimen Mounting Press Mechanical Type
  • Specimen Mounting Press Mechanical Type
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
MaterialMS Steel
Current5 Amp
Electricity Supply230 V
Frequency50 Hz



The machine is used for mounting Metallographic Specimens in a suitable thermoplastic or thermosetting material. Mounting makes the samples convenient for handling in subsequent polishing operations. Mounting of specimen is also essential where the edges of samples are to be preserved for examinations.

General Description and Specifications:

It is a screw press comprising of 1" dia. mould of alloy steel, heat-treated and internally ground. Both the main plunger and top plunger are also of heat-treated alloy steel suitably hardened and ground. The ramming action is obtained by means of a ratchet Lever provided at the front. Drive is through a pair of hardened steel crown wheel and pinion gears. The crown wheel is fitted on a heavy duty thrust ball bearing. A screw type lock with handle is provided for quick fixing of top plunger on mould during operation.

Specimen Mounting Press has concentric heating and cooling arrangement on the mould, ensuring a quick turn-out of samples. The processing time per sample is only 15 minutes maximum. Heating is by means of 400 watts heater and cooling by water circulation around the mould.

Standard Mould Diameter is 1" (11/4" diameter mould, optional). Extra mould assemblies of any diameter, not exceeding 50mm. can also be supplied at an extra cost.

Provided with Energy Regulator, Pilot Lamp and Three Core Cable and Plug Pin.

Finished in high gloss enamel and chrome plating.

Size: 12" x 12" x 19" approx.
Yes! I am Interested

Standard Samples of Metallurgical Microstructure


Standard Samples of Metallurgical Microstructure
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 35,000 / SetGet Latest Price

Product Details:
Minimum Order Quantity01 Set
Voltage (Volt)230 V
Frequency (Hz)50 Hz

  • Bakelite Mounted Ready Specimen for microscopic Observation,
  • A set consists of 23 Standard samples which covers the entire range.
  • Complete information including chemical composition, mechanical treatment, details of heat treatment, type of Etchant with description of Microstructure along with their colored photographs are provided in a booklet.
  • These sets are supplied in a wooden storing box with silica gel.
  • List of Metallic Microstructure:
  • Dead Mild Steel
  • Mottled cast Iron
  • Low Carbon steel
  • Ductile cast Iron
  • Medium Carbon steel (Annealing)
  • Cartridge Brass
  • Medium Carbon steel (Normalizing)
  • Muntz Metal
  • Decarburized High Carbon steel
  • Tin Bronze
  • Inclusion in steel
  • Electroplated Component
  • Hardened steel
  • Anodized Aluminium
  • Tempered steel
  • Fusion Welded Mild Steel
  • Carburized steel
  • Friction Welded Steel
  • Tool steel
  • Powder Metallurgy Component
  • Gray cast Iron
  • Deformed Mild Steel
  • White cast Iron

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Nhava Sheva
  • Production Capacity: 20
Yes! I am Interested

Jominy End Quench Hardenability Apparatus


Jominy End Quench Hardenability Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Surface TreatmentPowder Coating
Power Source230V

Under the strict supervision of our experienced professionals, we are offering a wide collection of Jominy End Quench Hardenability Apparatus that is used in labs. Our offered apparatus is available in a variety of sizes, shapes and other such specifications to choose from. The apparatus offered by us is precisely manufactured at our highly advanced manufacturing unit following industry defined guidelines. The offered apparatus can also be availed from us at the industry leading prices.


  • High efficiency

  • Trouble-free operation

  • Low maintenance cost

Yes! I am Interested


Explore More Products

Contact via E-mail
Contact via SMS
Xtreme Engineering Equipment Private Limited
Mahesh Pene (Director)
Survey No. 37/02, Ashtavinayak Industrial Estate, Parvati Nagar Dhayari Narhe Road,
Pune - 411041, Maharashtra, India
Call Us: 
Call Response Rate: 77%
Share Us :

Home  |   Company Brief   |  Our Products  |  Site Map  |   Contact Us

© Xtreme Engineering Equipment Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Xtreme Engineering Equipment Private Limited